IT'S FINISHED!!

I finaly finished Amy's Kitchen-Kubby. I forgot to take my camera to the shop so I didn't get any more pictures of the construction, but here are some finished shots. Mitchel joined me again at the shop with Trinity's son Justin (Mitchel's "Best Friend").

I added caps to each box unit. They over hang 1/2 inch on the sides and front. I also thought up a drawer system that allows the fruit, or what ever is in the drawer, to slope to the front when the drawer isn't very full. This is for asthetics (the drawers always look full) and for functionality (you don't have to bend over and reach way to the back of the drawer). I made a false bottom with a finger pocket in the back. When the drawer starts to get empty you simply reach back, lift the false bottom with the pocket and slide it up and back. The front of the false bottom stops on a catch on the bottom of the drawer. The drawer with fruit in the picture is actualy half full, but the fruit is brought to the front by the false bottom. I think it's pretty cool... and Amy likes it!

I also added a base to the bottom box unit to bring the whole thing a little higher, to add a little class, and because Amy wanted something like it! Trinity designed that part and I think he nailed it!

I had such a great time making this with Trinity. He showed me a lot of techniques and tools that make the process quicker and the piece much nicer! I want to public thank Trinity for all his help with this. It would not have happened without him. Again, if any of you have some sort of piece of furniture in mind; from cabinets to entertainment centers, to doors, anything, give him a call and he can make it for you! Look at some of his reclaimed wood furniture on ebay. Look up "reclaimed gun cabinet". From simple and standard, to unique and complex he can make it! I don't just want to put his phone number out into cyberspace, but contact me if you want his number and I'd be happy to put you in contact with him!

Amy's Surprise Part 2

So, I finaly got back in the shop with Trinity to finish (or so we were hoping) Amy's Kitchen-Kubby. (That's my amazingly clever name for it.)

So when we left our daring hero last he was trapped... oops, wrong story. When we finished last we had only made the 3 box sets. I went to work making the trim that goes along the top while Trinity started manufacturing the boards for the drawers.

The boxes are 39 inches wide, so with a radius of 1.5 inches, the box would allow 13 circles to fit tangentialy. I made them with a radius of 1.75 inches so they would over lap just right. Setting the center each radius 1 inch from the top of the trim gave enough material at the top to allow them to be attached to each box.

Trinity cut the trim out with the bandc saw after I had stenciled out the patern on each trim.

You're probably noticing a patern of Trinity doing most of the work with the large machines. The first reason is that he knows what he's doing and the second is that they belong to his employer and you can imagine all the legal issues that could come up if something happened... but mostly because he REALLY knows what he's doing... No, seriously, look this guy up if you want anything done wood-work-wise. Their shop is amazing!!...

After everything was cut out I glued them to the tops of each box and I tacked them on with a nail gun.

The boxes needed a lot of work pluggin the screw holes and sanding, so Trinity started building the drawers while I was working on the boxes.

The drawer is suppose to stick out from the front of the box with a beveled face to allow a better view at what's inside.

So, Trinity and I had the boys (he has a son the same age as Mitchel) and we got pretty involved and were there until midnight. The boys were great though. They played around in the sawdust in the shop and with some big lego blocks Trinity brought. Around 9:00 they got pretty hungry, so we made a Taco Bell run and set up the DVD player in Trinity's truck, which we pulled inside the shop to allow for better "baby monitoring." The boys were such troopers and they had a blast! The shop is right by the rail road tracks. They went nuts and made sure we took them outside to see the it go by.

Here is the finished product! (It still has a couple things to build, such as a base and the guides for the drawers... along with a couple "Zack" touches which are classified, but they will be released after Amy has seen them.) Anyway, I think it's coming along great and I can't wait to put some paint on it, glaze it, distress it and then lacquer it. What do you guys think?

Sorry for how goofed the pictures and text are... I don't know what happened and trying to fix it just made things go crazy!!

The Fountain...

So, while I'm waiting for schedules to work out to finish Amy's Kitchen-Kuby I started a couple other projects for Amy and also for my mom.

This is the fountain my father and I have been working on for a couple weeks. I didn't get any before and after pictures to give you an idea of the structure under the fountain, but I'll just say it involved a bit of a retaining wall, a lot of cinder blocks and some serious construction glue. The sides are still not finished (the membrane can be seen along the edges) and we're still tinkering with the flows, but it's pretty much finished. Here's a couple of pictures.

The pictures make it look pretty 2 dimensional. I'll see if I can add a video or something...

Amy's Little Surprise!

I WILL BE POSTING FINAL PICTURES WHEN IT IS COMPLETE. I'VE HAD SOME SCHEDULING CONFLICTS LATELY, BUT IT WILL BE FINISHED SOON!!

-----------------------------------------

I recognize that placing this on my blog kind of blows the surprise, but the surprise isn't that she doesn't know that I'm building it, but more in HOW I'm building it (and probably to her, that I can build it!) So, here are some pictures of the box portions being biult. I'm going to build the drawers next. In a shameless plug, and to give ample credit where it is due, my friend Trinity helped me by using the facilities at his job, Stellar Millworks, Inc. They are a fine company company who produce a great product... if any of you are in the market for custom wood works.

Here's crunching the numbers and making the cut sheet

We started out with 1 inch thick knotty alder boards 8 and 10 feet long to manufacture the required 3/4 inch thick planks.

The individual boards were glued together to make 4 boards 14 inches wide. Then they were squared up (I thought I took pictures of those two steps, but I didn't...) Then they were put through a band saw to, as shown below, to bring them to a thickness of 15/16. A bulk of the material is taken off with the band saw to decrease the amount the sander has to take off.

The planks were run through the wide belt sander to bring them to the final 3/4 inch thickness and for the desired finish texture

The planks have been laminated (glued), squared up and sanded. They finaly needed to be cut to the 14 inch width before the box sections could be cut. The saw we used for this step is called a Sawstop. It senses when a material besides wood hits the blade and stops it within 2 to 5 teeth. This stoping speed would result in just a nick on the part of the body that touched the saw. It's really quite amazing! After the planks were ripped to the appropriate width they were run through the belt sander to finish the edges.

The planks were finaly ready to be cut into the necessary pieces for the boxes.

Now the boxes could be built.

Plugs were made to cover the screw and fill in the hole made from counter sinking the screws.

Here is one of the three boxes. Two of the box sets have 3 bays, while the bottom box set has 2 bays for storing items that are larger and that we'll have more of. Now all that they need is the crown molding, paint and the distressing. I didn't put them all in the picture because I don't want to give too much away right now!

AMY, YOU'RE GOING TO LOVE THIS!

The Orders Are In...

Well, we found out the when and where's for the next year. I commission on 14 August at 11:00. I enter active duty on December 28. I will head to Maxwell AFB in Alabama for about 5 weeks for training. Its considered TDY (Temporary Duty) en route because it's "on my way" to my actual receiving base (Sheppard AFB in Texas.) After Maxwell I'll go to Sheppard. We'll be there together for a month or so and then I leave in March for IFS (Initial Flight Screening) in Pueblo, CO. That will go for about 5 weeks. I'll return to Shepard and "work" until ENJJPT starts in June. Right now Amy and I are discussing and praying about what to do in the times between April -August and August - December.

I just can't wait to get done with school and get on with life. Part of the plan will to be let Amy go back to school and take some classes that she's had in mind for a while. She really has grown a love for Africa, its people and their history/struggles. So, one or more of the classes will be an African Studies class. Anyway, that's the quick and dirty on our plans for the next year or so.

We are so excited to get started with this new chapter of our lives.

We are so thankful for the Lord's help in getting us to this point. He made it clear that this is what we were suppose to come and do and from the way He has made things possible we have no doubt that this is where we're suppose to be.

I have to say, that I have been blessed with the GREATEST wife in the world. From the time we moved up here to finish school and go through ROTC, everything has seemed to revolve our me and Amy pushed everything in her life out of the picture to fit my big fat schedule in. Though she would never think of saying anything about it, I have to tell everyone that she has sacrificed so much for me to be where I am and I wouldn't be here if it wasn't for her. She has kicked my butt when required and put her arms around when needed. Amy is AMAZING! ...but I'm pretty sure you all knew that!

How Can People Think Its Right

With all the political trash getting thrown around I can't believe a lot of what I'm hearing. I don't undersand how people can look at these economic and social policies and say to themselves, "That's what this country needs! That's what will really solve the problem!"

I AM SICK AND TIRED OF PEOPLE THINKING THEY ARE ENTITLED!!! The only thingsyou're entitled to protection and what ever you can beat-down and drag back to the cave! Why can't people look at EVERY OTHER SOCIALIST BASED SYSTEM and SEE THAT IT IS FAILING OR HAS FAILED!!! Adam was told that by the sweat of his brow he would gain his bread not from the government he should set up!... I have to stop... just read this little analogy and seriously think about it!


Our Tax System Explained: Bar Stool Economics

Suppose that every day, ten men go out for beer and the bill for all ten comes to $100. If they paid their bill the way we pay our taxes, it would go something like this: The first four men (the poorest) would pay nothing.The fifth would pay $1.The sixth would pay $3.The seventh would pay $7.The eighth would pay $12.The ninth would pay $18.The tenth man (the richest) would pay $59. So, that's what they decided to do.The ten men drank in the bar every day and seemed quite happy with the arrangement, until one day, the owner threw them a curve. 'Since you are all such good customers,' he said, 'I'm going to reduce the cost of your daily beer by $20.' Drinks for the ten now cost just $80 The group still wanted to pay their bill the way we pay our taxes so the first four men were unaffected. They would still drink for free.

But what about the other six men - the paying customers? How could they divide the $20 windfall so that everyone would get his 'fair share?' They realized that $20 divided by six is $3.33. But if they subtracted that from everybody's share, then the fifth man and the sixth man would each end up being paid to drink his beer. So, the bar owner suggested that it would be fair to reduce each man's bill by roughly the same amount, and he proceeded to work out the amounts each should pay. And so:The fifth man, like the first four, now paid nothing (100% savings).The sixth now paid $2 instead of $3 (33%savings).The seventh now paid $5 instead of $7 (28%savings).The eighth now paid $9 instead of $12 (25% savings). The ninth now paid $14 instead of $18 (22% savings).The tenth now paid $49 instead of $59 (16% savings).Each of the six was better off than before. And the first four continued to drink for free. But once outside the restaurant, the men began to compare their savings. 'I only got a dollar out of the $20,'declared the sixth man. He pointed to the tenth man,' but he got $10!''

Yeah, that's right," exclaimed the fifth man. 'I only saved a dollar, too. It's unfair that he got ten times more than I got''

That's true!!' shouted the seventh man. 'Why should he get $10 back when I got only two? The wealthy get all the breaks!''

Wait a minute,' yelled the first four men in unison. 'We didn't get anything at all. The system exploits the poor!'The nine men surrounded the tenth and beat him up. The next night the tenth man didn't show up for drinks so the nine sat down and had beers without him. But when it came time to pay the bill, they discovered something important. They didn't have enough money between all of them for even half of the bill! And that, ladies and gentlemen, journalists and college professors, is how our tax system works. The people who pay the highest taxes get the most benefit from a tax reduction. Tax them too much, attack them for being wealthy, and they just may not show up anymore. In fact, they might start drinking overseas where the atmosphere is somewhat friendlier.

David R. Kamerschen, Ph.D.
Professor of EconomicsUniversity of Georgia

[For those who understand, no explanation is needed. For those who don't, no explanation is possible.]